|
|
 |
|
Updated: |
|
|
If Performance Motorsports can't find
it... It's probably not on this planet!
EMAIL
US HERE!
REMEMBER: Most Photos on our site are thumbnails They will show additional detail if clicked... CLICK PHOTOS TO ENLARGE |
|
|
|
|
|
|
|
|
|
$3250 |
 |
$2650 |
 |
$850 |
 |
$150 Vent |
 |
$3250 4 butterfly PSI hat |
 |
$2650 4 butterfly PSI hat |
 |
$2650 4 butterfly PSI hat |
|
|
$3250 4 butterfly PSI hat |
 |
MAX injector spacer 4" high moves injector forward 2" as well black anodizes, cast aluminum, fits birdcatcher opening.
$525.00 |
 |
MAX products, 4" injector spacer, also moves injector forward 4.5 inches, fits bird, bug and buzzard openings, comes black anodized with 6 port nozzle locations. $575.00 also available polished for $675.00 |
 |
JBR billet fuel injection throttle bracket for tall injectors $129.00 |
  |
Billet fuel injector spacer -moves
fuel injection unit up 1 inch and forward 2 inches for small opening
blowers this lines the rear of the injector up with the rear of the
opening on the blower,
eliminating the shelve effect in the injector housing-creating a
better boost signal . Attractively priced at $ 298.00 |
 |
Enderle makes an assortment of great
products for the racer, this is one of those great ideas it is a
main bypass pill holder ,it will keep them organized and ready to
use holds 40 bypass jets $ 23.50 ea |
  |
|
 |
RCD Front Magneto/Fuel Pump Drive $725.00 |
 |
Enderle 6" fuel pump extension with shaft. All billet construction ,with stainless mounting hardware and both Enderle and Hilborn pump patterns. $130.00 |
 |
Fuel Pump
extension Enderle 6" fuel pump extension, same as above but features a quick release flange and adapter plate for fuel pump, all stainless hardware
|
 |
Fuel Pump
extension 2" to 6" to move fuel pump out for belt clearance Enderle Billet design with mounting hardware $105.00 add $47.00 for quick release
clamp and flange kit. |
 |
Enderle
Fuel shutoff and loop line This brings all returns back into the inlet.and gives an outlet for returns $148.00 |
| Enderle 110 pumps new coated this
is the industry standard for a blown alcohol motor 13.9 gallons @4000 rpm
.
$427.00 |
|
|
Enderle 80-A
pump NEW! Coated pump flows 6.9 gallons @4000 rpm. Ideal for injected motors or SB Blown motors $389.00 |
| 8 fuel shut off cable bracket for
fuel pumps 80A or 110
$38.00 |
|
|
8 fuel shutoffs $89.00 Used $50.00 |
| 6 fuel shut off Enderle
$ 98.00
|
|
| 8 shutoff NEW! Enderle $ 98.00 | |
 |
110 Enderle fuel pump
$525.00 |
 |
Fuel return manifold, red anodized with 3 #6 return lines going into 1 single -8 return line
$79.00 |
 |
Bridge to mount Enderle/Hilborn fuel pump to jessel belt drive on front of block
$179.00 |
 |
Throttle linkage cable bracket for Enderle Bugcatcher/Birdcatcher
$49.00 |
 |
This is a universal throttle return
spring for the Enderle bug catcher or bird catcher all the way up to
the big and ugly injector it comes with special attachment screw and
is a cut to length part.
$12.95 |
 |
Kuhl River Rat water pump for your boat, race car, or street rod. It is stackable with an Enderle or Hilborn fuel pump and can replace a fuel pump extension. Comes with -10 inlet & -8 outlet fittings. Polished finish.
$489.00/ea |
 |
Fuel injector nozzle wrench -fits all those tight hard to get nozzles
$49.00/ea |
 |
Enderle 3 hole upright injector, polished, with K style barrel valve and hand formed scoop - $1550.00 |
 |
Enderle 3 hole upright injector, 65 sq inch butterflies, features bird bolt pattern, with tractor pull/mud bog air filter assembly, with K style metering valve and high-speeds set up for alcohol. All magnesium - $1200.00 |
 |
Hilborn 4 port upright injector with polished scoop complete with all lines nozzels and jets ready to run alcohol or gas -$1750.00 |
 |
This is a
nice used injector set up for
alcohol:
Hilborn 4 port injector with scoop ,$1,300.00 |
 |
ENDERLE FUEL INJECTION
BUGCATCHER 3 rib fuel Injector
Set up for gas ready to rock. $1163.00 |
 |
ENDERLE FUEL INJECTION
BUGCATCHER
Set up for nitro and ready to cackel. $1,269.00 Set up for electronic fuel injection
with control box. $4,970.00
|
 |
Enderle Bird
Catcher Fuel Injection
Set up for alcohol with all hard lines nozzles and jets. Ready to run and flowed for your application. $1,095.00 Set up with k style barrel valve for alcohol. $1,199.00 Set up for nitro.
$1,268.00
|
 |
Complete new Hilborn electronic fuel injection EFI kit for sb Chevy complete with wiring harness, injection unit, fuel pump and control box.
$ 4800.00 |
 |
Enderle fuel
injection tunnel ram style Alcohol Fuel Injector On a tunnel ram intake manifold. Complete ready to run !!! Includes 80A fuel pump, fuel shut-off valve, cable & bracket and an aluminum front cover assembly. $2,389.00 |
 |
Carbon
Injector Hat
Low rise funny car style with shaft and butterflies. Ready to bolt on your 10-1/2 opening injector. New and on the shelve. $2,350.00 |
 |
|
 |
Enderle Big & Ugly Fuel
injection
New aluminum polished version of carbon injector will accept all standard components. This Big and Ugly injector is the same dimensions as the popular carbon fiber injectors, but cast in durable aluminum, and has a great polish job. This is the ultimate for big blowers and in stock for immediate delivery. $1,238.00 with shaft and butterflies. $1,789.00 with all lines, nozzles,
jets and a K-style barrel valve. Ready to bolt onto your small opening
blower.
|
 |
NEW! The all new Enderle SHORT and Ugly! A full 2-1/2 shorter than the famous big and ugly,
|
|
|
|
|
|
|
|
|
|
|||||||
|
Copyright © 1999-2010 Performance Motorsports All rights reserved |
|
Website: |
 |
||||||
|
|
