Cylinder Heads
& Valve train
Alan Johnson
Billet Big Block Chevrolet Heads
(click on sheets for more
info)
 |
Alan Johnson BB
Chevrolet Billet Heads
Ready to bolt on
your big block Chevy engine. Completely
assembled with all valves springs, retainers and
locks ---- $8200.00
I have a set
we are rotating out of our racing inventory
$7,100.00.
Serviced and
ready to run.
Bare Castings --- $6,100.00 |
 |
BB
Chevrolet Crank Support
with hub and degree ring interchanges with RCD support - $685.00 |
|
Billet aluminum rods , 100% American made! Fully CNC machined 7075 material,7068 is availible any pin size any reasonable length, ARP 2000 bolts, optional L-19 bolts, Direct replacement for Brooks B-2 rods, Cryogenic metal processing availible +$125.00, best value on the market!
$875.00 - 2 week turnaround time |
 |
12oz.TORCO MPZ engine assembly lube
$12.95/ea |
 |
Pro Jack air jacks for dragster - complete with pump and lines - fresh powdercoat.
$1700.00 |
-BB Chevrolet 990 iron
square port cylinder heads
Bare castings, disassembled &
cleaned
$450.00 |
Blocks & Cranks
|
-BB Chevrolet 3.760 steel
crankshafts brand new! GM forged steel crankshafts
std./std. ready to run -- $459.00
-RCD ft crank support
billet aluminum with fully degreed hub, complete ready to
run, includes all hardware -- $939.00
KB Olds/Century timing
cover gaskets -- $13.00 ea.
|
Complete Engines
572 Arias hemi Chevy, Merlin x aluminum block 10.200 deck height, Eagle 4.500 stroke crank, 6.535 Hbeam rods, Arias 14-1 pistons, Helfire rings, Isky, Milodon, taylor Howards, Nuytten 1050 carburator, Carbon wrap parts, MSD distributor, ready to run
$23,500 delivered in 48 states
*********************************************************************
All Aluminum Chevrolet engine
10.200 new century block, Crower forged crank 3.750 stroke, 7.100 length Brooks rods, RCD gear drive, crank hub, ilder bracket, pulleys, .904 lifters, Bullet camshaft, Venolia pistons, Alan Johnson billet cylinder heads, Comp rockers, Manton pushrods, ready to run!
$17,500 delivered in 48 states
*********************************************************************
 |
495" Arias hemi chevy all new, Arias hemi chevy conversion with trick ported heads, New Century aluminum soild block 4.440 bore .904 lifters, Titan billet pump, clevite bearings., Billet fab 2 peice oil pan, Rcd geardrive, crank hub, crank trigger, idler assembly, front magneto drive, Crank support, velasco 4" billet crank, Arias pistons, Akerly & childs rings, NGK PLUGS, Isky red zone lifters, Valley cover, Blower shop hihelix blower, Blower shop blower drive, MGP billet rods, Olsen zoomies chrome, Crane roller cam, MSD 20 amp magneto, Taylor wire set
RCD 8MM pulleys and belt, All new!
Professionally assembled and ready to rock!
$36,000 delivered in USA |
| |
| |
| |
Arias Hemi Chevy
|
The ultimate street crate engine !
540 cubic inches
Oil pan to manifold, can
be run as a single 4 bbl motor or supercharged!
Merlin 3 block, cast iron
10.200 deck 4.500 bore
Eagle forged crankshaft
4.250 stroke
Eagle H beam connecting
rods
Arias forged pistons for
the Hemi Chevy with pins rings Isky hydraulic roller
camshaft
Pro comp electronic
ignition
Milodon timing set
Milodon oil pan for Hemi
Chevy
Milodon water pump
Melling high volume oil
pump
Clevite Premium engine
bearings |
HEMI CHEVY CYLINDER HEAD KIT
redesigned for street rod use complete cylinder head
conversion packages starting at
$10,760.00
|
| |
Arias Hemi Chevy cylinder
heads includes:
1 pair of cast aluminum
Hemi Chevy cylinder heads completely assembled with
premium Stainless valves, seals, springs, retainers &
locks,
2 pair of Rocker arm
assemblies with billet rocker stands, heat treated
rocker shafts, heat treated intake rocker arms with
needle bearing tips included with tool steel adjusters.
1 set Manton push rods
with tool steel tips
1 pair cast alum. valve
covers & breathers
1 set spark plug
tubes and seals
1 pair of steel header
flanges
1 cast alum intake
manifold (blower or carb.)
1 cast aluminum valley
cover gaskets for heads, valley cover, hardware for
cylinder heads valve cover and breathers
Cylinder head kits
assembly and dyno tested
available from
$18,900.00 |
739 hp. @ 6500 rpm with a 1-1
street blower and 3 pounds of boost!
|
Fuel & Ignition
 |
Summers Brothers Mag Drive
standard cam height Big block chevrolet with front mag drive - nice used shape save big - $535.00 |
 |
Enderle
Birdcatcher Tunnel ram fuel injection set up
ready to run. Included is a tunnel ram intake
manifold, cast aluminum birdcatcher adapter, new
polished birdcatcher injector, a 80a fuel pump, and
your choice of a belt drive or camshaft driven fuel
pump. Each unit is setup & calibrated for your
application at no additional charge.
$2189.00 |
| |
|
-Mallory Super mag 3 new
3.9 amps ready to run with case, transformer, generator,
base and wiring instructions --
$949.00 REMANUFACTURED UNITS FROM -
$475.00
-6-71 blower kit, set up
for std deck, all pulleys belt snout etc. street gas
POLISHED new 6-71 ! ---- $2,940.00
-Magneto 6" offset fits
in standard distributor location.
For use with larger 14-71
blower. It will accept MSD or Mallory magneto
$675.00
-4" magneto offsets same
as above but more compact ----
$650.00
--BB blower belt guard
(new rules) $175.00 with
studs and stands $249.00
-BB Chevrolet cast
polished plain valve covers, extra tall, best quality
$155.00
-Burn down breathers,
polished aluminum accepts 1" hose
$165.00 pr.
-BB blower hub ext.
balance 454 **NEW** With fully degreed timing ring
$248.00
|
Bolt on Parts & Accessories
 |
Kuhl River Rat water pump for your boat, race car, or street rod. It is stackable with an Enderle or Hilborn fuel pump and can replace a fuel pump extension. Comes with -10 inlet & -8 outlet fittings. Polished finish.
$489.00/ea |
 |
System 1 oil filter system
This is a completely
serviceable oil filter system allowing between round
cleaning of the oil filter with a removable canister lid and
cleanable wire mesh screen, available with -10 or -12 A-N
fittings and shown with available frame mount for 1-2/2to
1-5/8 tube size
screw on filter $148.00
with frame mount bracket
$259.00
Billet block mount with fittings
$112.00
|
| |
|
| -Polished aluminum zoomie covers $89.99
-Billet fabrication oil
pans all aluminum construction, very nice from
$425.00
-BB Chevrolet new! RCD
gear drive the best billet aluminum ready to rock! -
$945.00
-BB roller rockers
**NEW** Billet Aluminum
$250.00
|
Internal Parts & Accessories
 |
Manley or Manton pushrods for all your engine applications, many in stock - quick 4-day delivery for custom applications.
From $89.00/set set |
 |
Bridge to mount Enderle/Hilborn fuel pump to jessel belt drive on front of block
$179.00 |
 |
King engine
bearings set BB Chevy rod, drilled and
narrowed
available in
+.001, -.001. standard, .010, .020
$57.00
King engine
bearings, Main bearings std., available in
+.001, -.001, standard, .010, .020
sets
$68.00 |
 |
Crower connecting
rods
For sportsman
type rods $695.00
and up. Pro billet and titanium rods available
by request. |
 |
Akerly &
Childs ring sets from
$189.00
Call for
pricing for your application. There are many
ring / bore sizes available as well as materials
and styles. |
 |
Titan Pro Oil
Pump
All billet
construction $695.00
NEW!
Titan
sportsman Oil Pump, same as billet ,but starts
as a casting NEW!
$389.00
Why spend more on
a cheap offshore copy?
Get the
original and the best !
|
|
|
Arias big block
pistons for your Chevrolet Click here for information
chart
 |
-Arias blown gas pistons
4.280 - 4.310 bore with pins ----
$698.00 set
-Ackerly & Childs bearings
sets from ---- $149.00
-BB Chevy Arias 12-1
pistons 4.280-4.310 new ! set of 8 with pins ----
$630.00
-Titan rubber coated head
gaskets for street or marine applications with same water
soft copper sealing. The sealant is pre applied and a built
in cylinder o-ring ---- $147.00
pr.
-BB trick RCD crank bolts
1/2'' and 3/4" fine rolled thread ----
$55.00
-BB Chevrolet intake
gasket sets ---- $18.00
-BB Chevrolet one piece
oil pan sets. ---- $60.00 |
|
